IN0011000-alfa_pro_day_to_day_insole-black
IN0011000-alfa_pro_day_to_day_insole-black-above
IN0011000-alfa_pro_day_to_day_insole-black-front

ALFA PRO Day to Day Insole - Heat molded innersole with ESD

Stable insole that molds anatomically to the foot for maximal comfort.  When heated, the sole can be shaped exactly to your foot.

Description

The ALFA PRO Day to Day insole provides good support, stability and transports moisture to keep you dry and avoid odor. The insole is antibacterial, recyclable and a 100% vegan product. Can be washed with a cloth and warm water, or 

ALFA's organic Clean and Refresh spray

.

 The insole has antistatic properties and is approved for Electrostatic discharge (ESD), so it can also be used in all protective footwear. 


How to heat-mold the insole:

  1. Pre-heat the oven to 90°C (Floot heat mode)
  2. Place the insoles side-by-side with the graphics facing upwards on a grill rack on the lower level of the oven. Heat for 3 minutes. The insole surfaces will be hot, be careful to avoid any risk of burns.
  3. Allow the insole to cool for 2 minutes as a precautionary measure.
  4. Insert the insole in your footwear, replacing the original insoles.
  5. Put the shoes on your feet. It is important that you remain standing, and exert pressure on the insoles, for at least 2 minutes.
It is recommended that you keep the footwear on for at least 1 hour after standing for the first 2 minutes so that the footprint is shaped as best as possible while the insoles gradually cool down.

Regular price€49,00
/
Shipping calculated at checkout.

Size
  • In stock, ready to ship
  • Inventory on the way
  • Check Free Express delivery from €50 in Europe | €249 World Wide
  • Check Free 30-day returns
  • Check 2 years warranty